Home > Product > Control Panel > ATS panel
Overview
As a cornerstone of modern electrical infrastructure, the Dual Power ATS GGD Cabinet integrates advanced sensing technology
with high-grade switching components. This system is specifically designed to monitor voltage stability and frequency, initiating an
autonomous transfer the moment an anomaly is detected in the main feed. Unlike manual setups, this 3-Phase Low Voltage ATS
Switchgear eliminates human error and reduces downtime to milliseconds. The cabinet structure is optimized for heat dissipation
and cable management, making it an ideal choice for contractors seeking a "plug-and-play" solution for complex distribution networks.
By prioritizing both safety and efficiency, this unit provides a sophisticated interface for managing dual-input power configurations
in demanding environments.
Core Components and Features
The heart of the system lies in its integrated logic, often governed by a SmartGen or similar high-end digital controller that provides
real-time status updates and manual-auto mode flexibility. Within this Low Voltage ATS Distribution Cabinet, the switching execution
is handled by a heavy-duty 200A MCCB Automatic Transfer Switch Panel configuration. This setup utilizes molded case circuit breakers
equipped with motorized operators to physically shift the load between Source A (Utility) and Source B (Generator/Backup). The internal
copper busbars are precision-engineered to handle consistent thermal loads, while the secondary control circuit is protected by dedicated
miniature breakers. This ensures that even during a transition, the control logic remains powered and responsive. The front fascia
features an intuitive HMI, allowing operators to monitor phase voltages, current loads, and fault logs without opening the protective
inner doors, ensuring both high visibility and operational safety.
Design and Compliance
Design:
The enclosure follows the GGD technical framework, utilizing a carbon steel frame that offers exceptional rigid support for internal heavy
duty components. This 200A ATS Distribution Board is designed with ventilation louvers and internal spacing that facilitates natural
convection, preventing heat buildup during high-load periods. The modular interior allows for easy access to terminal blocks and busbars,
simplifying routine maintenance and future upgrades. Every surface is finished with a high-durability epoxy powder coating to resist
corrosion and environmental wear.
Compliance:
Compliance is central to the design philosophy, meeting international IEC 60947 standards for low-voltage switchgear. The electrical
architecture ensures complete isolation between the two power sources, preventing back-feeding or phase-to-phase short circuits during
the transfer process. Integrated over-current, under-voltage, and phase-loss protections are standard, ensuring the load is never exposed
to unstable power. Furthermore, the grounding system is rigorously tested to ensure personnel safety and equipment longevity in diverse
grounding environments.
Key Advantages
Uninterrupted Operational Continuity
Equipped with a high-speed Motorized Changeover Switch for Generator sets, the system detects utility failure and commands a start-up
and transfer within a programmable time delay. This eliminates the risk of data loss or production halts in critical facilities.
Enhanced Component Longevity
By using industrial-grade MCCBs instead of basic contactors, the panel offers superior arc-quenching capabilities and a higher short-circuit
withstand rating. This significantly extends the service life of the switching mechanism under frequent operation.
User-Centric Monitoring
The digital control interface provides granular data on power quality. Users can adjust transfer delays and voltage thresholds directly
on-site, allowing the panel to adapt to specific grid conditions without requiring external software.
Simplified Installation and Maintenance
The GGD cabinet's bottom-entry cable design and spacious wiring ducts allow for rapid deployment. Clear labeling of all internal control
wires reduces troubleshooting time for onsite electricians, lowering long-term operational costs.
Parameter
Voltage Rating |
AC 380V/400V/415V |
Model Type |
GGD Standard Enclosure |
Rated Current |
200A |
Phase Configuration |
3-Phase 4-Wire |
Protection Rating |
IP55 Standard |
Breaking Capacity |
35kA - 50kA (MCCB Dependent) |
Controller Type |
Digital ATS Smart Controller |
Application Scenarios
Industrial Manufacturing and Processing
In factories where a sudden power cut can damage sensitive machinery or ruin batches of raw materials, this ATS system is indispensable.
It manages the transition between the grid and onsite diesel generators, ensuring that production lines, cooling fans, and hydraulic systems
remain active regardless of external power stability.
Data Centers and Telecommunications
Information integrity relies on 24/7 uptime. This panel serves as the primary gateway for server racks and network hubs, coordinating
with UPS systems to provide a multi-layered defense against power outages. Its ability to monitor phase balance ensures that delicate
electronic equipment receives "clean" power at all times.
Commercial Infrastructure and Healthcare
High-rise office buildings, shopping malls, and hospitals require reliable power for elevators, emergency lighting, and life-support systems.
The ATS panel provides the necessary automation to handle these life-safety loads, switching to backup power instantly to maintain
building safety and operational readiness during urban grid failures.
Maritime and Remote Island Power
For island microgrids or maritime facilities where the power supply is often a mix of local solar, wind, and diesel generators, the ATS cabinet
acts as the central intelligence for source management. It ensures that the most stable and cost-effective source is always prioritized, effectively
balancing the load across varying generation inputs.
EN
